Search Results

Search found 28439 results on 1138 pages for '9 10'.

Page 704/1138 | < Previous Page | 700 701 702 703 704 705 706 707 708 709 710 711  | Next Page >

• Most effective work habit for coding? [on hold]

  - by Cris

  Working on a big solo project (~15,000 LOC), I am encountering the following phenomenon: I seem to work best when I program in short bursts of 10-15 minutes. Right now I am working on a section which is a complete first time for me architecturally and if I have any architectural issues that emerge when doing the implementation, I seem to be able to best serve these by taking a total break. Then, later, sketching out the ideas on some paper. And when I feel I have sufficient clarity, then going back to code. This iterates until that architectural issue for that section is resolved. This seems quite counter intuitive: that I can progress more quickly by coding less, and taking more breaks. I am nearing the end of the sections which are "first times" for me, and about to dive into stuff which I am much more familiar and am wondering if this counter intuitive efficiency will continue. So my question is: even for regular coding of sections one is familiar with, which don't require constant re-clarification of the best architecture, is more progress to be attained by taking more breaks and coding in bursts?

  Read the article

• Synaptics drivers are not loading on Kubuntu 13.10 on Dell Vostro 2420

  - by Alok Singh Mahor

  I freshly installed Kubuntu 13.10, 32 bit version on newly purchased Dell Vostro 2420. everything is working fine except scrolling and multitouch features through touchpad. I am able to change position of cursor using touchpad and able to tap (single click and double click) but scrolling is not working I tried to find out solution by searching on google but could not find proper solution to load synaptics drivers. i am listing some details: Laptop: Dell Vostro 2420 Linux Kernel version and distribution: 3.11.0-12-generic, Kubuntu 13.10 output of xinput list is ? Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? PS/2 Generic Mouse id=12 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Video Bus id=7 [slave keyboard (3)] ? Power Button id=8 [slave keyboard (3)] ? Sleep Button id=9 [slave keyboard (3)] ? Laptop_Integrated_Webcam_HD id=10 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=11 [slave keyboard (3)] ? Dell WMI hotkeys id=13 [slave keyboard (3)] Output of synclient -l is Couldn't find synaptics properties. No synaptics driver loaded? output of lshw is at http://paste.ubuntu.com/6645687/ xserver log and dmesg dont have trace of synaptics kindly tell me how to troubleshoot this problem.

  Read the article

• AndEngine Box2d game

  - by OneMoreVladimir

  I'm developing a 2d survival shooter using Box2d extension and I've got some questions: I have two AnalogOnScreenControls. Their listeners modify both sprites and bodies. I receive TouchEventPool was exhausted and as their number grows the game crashes accidently. I've tried to put the modification of the bodies and sprites on the UpdateThread but that does not solve the problem. What could be the cause? I have a class that at the beginnig of the game loads all the textures. After I relaunch the game activity several times I receive Unable to find Phys Addr for and "green color" interface. But that doesn't happen if I clear the memory manually through the Task Manager before relaunch What could be the cause? I unload my atlas at the end of the game. The game sometimes crashes at start with NullPointerException in onResumeGame. The solution suggested is to set android:configChanges="orientation|screenSize" but my device is API 10 so it doesn't have screenSize property and orientation only does not seem to help, because the game starts in portrait mode at times (though landscape is set in the code)

  Read the article

• Making files generally available on Linux system (when security is relatively unimportant)?

  - by Ole Thomsen Buus

  Hi, I am using Ubuntu 9.10 on a stationary PC. I have a secondary 1 TB harddrive with a single big logical partition (currently formatted as ext4). It is mounted as /usr3 with options user, exec in /etc/fstab. I am doing highspeed imaging experiments. Well, only 260fps, but that still creates many individual files since each frames is saved as one png-file. The stationary is not used by anyone other than me which is why the default security model posed by ubuntu is not necessary. What is the best way to make the entire contents of /usr3 generally available on all systems. In case I need to move the harddrive to another Ubuntu 9.x or 10.x machine? When grabbing image with the firewire camera I use a selfmade grabbing software-utility (console based) in sudo-mode. This creates all files with root as owner and group. I am logged in as user otb and usually I do the following when having to make files generally available to otb: sudo chown otb -R * sudo chgrp otb -R * sudo chmod a=rwx -R * This takes some time since the disk now contains individual ~200000 files. After this, how would linux behave if I moved the harddrive to another system where the user otb is also available? Would the files still be accessible without sudo use?

  Read the article

• How to get that first development job

  - by cju

  I have been in QA for 10 years, trying to get into developement for about 5 of them. I have taken classes in C++, Java and C#. I was able to write some tools and unit tests in C# at my current job and (by all accounts) did a good job of it. However, 8 months ago, my employer tasked me with the responsibility of establishing the new QA group. Now, I'm doing manual testing and deployment with no promise of returning to development. I have looked at the job boards and there are a lot of jobs for Web developers and wondered how I could break into that. I've picked up some books on Ruby on Rails that I plan to work through on the Mac at home, but I'm not sure employers would be interested in anything but commercial web development. Do you have any suggestions on how I can use my experience to get a job as a junior developer? And I mean one that entailes programming...the postings I've seen for junior developer amount to doing all the grunt work besides coding. They should just call them "Technical Secretaries".

  Read the article

• mdadm: brakes boot due to "is not ready yet or not present" error

  - by BarsMonster

  This is so damn frustrating :-| I've spent like 20 hours on this nice error, and seems like dozens of people over Internet too, and no clear solution yet. I have non-system RAID-5 of 5 disks, and it's fine. But during boot up it says that "/dev/md0 is not ready yet or not present" and asks to press 'S'. Very nice for Ubuntu Server - I have to bring monitor and keyboard to go next. After this system boots and it's all fine. md0 device works, /proc/mdstat is fine. When I do mount -a - it mounts this array without errors and works fine. As a dumb and shameful workaround I added noauto in /etc/fstab, and did mounting in /etc/rc.local - it works fine then. Any hints how to make it work properly? fstab: UUID=3588dfed-47ae-4c32-9855-2d69df713b86 /var/bigfatdisk ext4 noauto,noatime,data=writeback,barrier=0,nobh,commit=5 0 0 mdadm config: It is autogenerated: # mdadm.conf # # Please refer to mdadm.conf(5) for information about this file. # # by default, scan all partitions (/proc/partitions) for MD superblocks. # alternatively, specify devices to scan, using wildcards if desired. DEVICE partitions # auto-create devices with Debian standard permissions CREATE owner=root group=disk mode=0660 auto=yes # automatically tag new arrays as belonging to the local system HOMEHOST <system> # instruct the monitoring daemon where to send mail alerts MAILADDR CENSORED # definitions of existing MD arrays ARRAY /dev/md/0 metadata=1.2 bitmap=/var/md0_intent UUID=efccbeb6:a0a65cd6:470dcdf3:62781188 name=LBox2:0 # This file was auto-generated on Mon, 10 Jan 2011 04:06:55 +0200 # by mkconf 3.1.2-2

  Read the article

• Compiling GCC or Clang for thumb drive on OSX

  - by user105524

  I have a mac book that I don't have admin rights to which I would like to be able to use either GCC or clang. Since I lack admin right I can't install binutils or a compiler to /usr directory. My plan is to install both of these (using an old macbook that I do have admin rights for) to a flash drive and then run the compiler off of there. How would one go building gcc or clang so that it could run just off of a thumb drive? I've tried both but haven't had any success. I've tried doing it defining as many of the directories as possible through configure, but haven't been able to successfully build. My current configure script for gcc-4.8.1 is (where USB20D is the thumb drive): ../gcc-4.8.1/configure --prefix=/Volumes/USB20FD/usr \ --with-local-prefix=/Volumes/USB20FD/usr/local \ --with-native-system-header-dir=/Volumes/USB20FD/usr/include \ --with-as=/Volumes/USB20FD/usr/bin/as \ --enable-languages=c,c++,fortran\ --with-ld=/Volumes/USB20FD/usr/bin/ld \ --with-build-time-tools=/Volumes/USB20FD/usr/bin \ AR=/Volumes/USB20FD/usr/bin/ar \ AS=/Volumes/USB20FD/usr/bin/as \ RANLIB=/Volumes/USB20FD/usr/bin/ranlib \ LD=/Volumes/USB20FD/usr/bin/ld \ NM=/Volumes/USB20FD/usr/bin/nm \ LIPO=/Volumes/USB20FD/usr/bin/lipo \ AR_FOR_TARGET=/Volumes/USB20FD/usr/bin/ar \ AS_FOR_TARGET=/Volumes/USB20FD/usr/bin/as \ RANLIB_FOR_TARGET=/Volumes/USB20FD/usr/bin/ranlib \ LD_FOR_TARGET=/Volumes/USB20FD/usr/bin/ld \ NM_FOR_TARGET=/Volumes/USB20FD/usr/bin/nm \ LIPO_FOR_TARGET=/Volumes/USB20FD/usr/bin/lipo CFLAGS=" -nodefaultlibs -nostdlib -B/Volumes/USB20FD/bin -isystem/Volumes/USB20FD/usr/include -static-libgcc -v -L/Volumes/USB20FD/usr/lib " \ LDFLAGS=" -Z -lc -nodefaultlibs -nostdlib -L/Volumes/USB20FD/usr/lib -lgcc -syslibroot /Volumes/USB20FD/usr/lib/crt1.10.6.o " Any obvious ideas of which of these options need to be turned on to install the appropriate files on the thumb drive during installation? What other magic occurs during xcode installation which isn't occurring here? Thanks for any suggestions

  Read the article

• Priority Manager&ndash;Part 1- Laying out the plan

  - by Patrick Liekhus

  Now that we have shown the EDMX with XPO/XAF and how use SpecFlow and BDD to run EasyTest scripts, let’s put it all together and show the evolution of a project using all the tools combined. I have a simple project that I use to track my priorities throughout the day.  It uses some of Stephen Covey’s principles from The 7 Habits of Highly Effective People.  The idea is to write down all your priorities the night before and rank them.  This way when you get started tomorrow you will have your list of priorities.  Now it’s not that new things won’t appear tomorrow and reprioritize your list, but at least now you can track them.  My idea is to create a project that will allow you manage your list from your desktop, a web browser or your mobile device.  This way your list is never too far away.  I will layout the data model and the additional concepts as time progresses. My goal is to show the power of all of these tools combined and I thought the best way would be to build a project in sequence.  I have had this idea for quite some time so let’s get it completed with the outline below. Here is the outline of the series of post in the near future: Part 2 – Modeling the Business Objects Part 3 – Changing XAF Default Properties Part 4 – Advanced Settings within Liekhus EDMX/XAF Tool Part 5 – Custom Business Rules Part 6 – Unit Testing Our Implementation Part 7 – Behavior Driven Development (BDD) and SpecFlow Tests Part 8 – Using the Windows Application Part 9 – Using the Web Application Part 10 – Exposing OData from our Project Part 11 – Consuming OData with Excel PowerPivot Part 12 – Consuming OData with iOS Part 13 – Consuming OData with Android Part 14 – What’s Next I hope this helps outline what to expect.  I anticipate that I will have additional topics mixed in there but I plan on getting this outline completed within the next several weeks.  Thanks

  Read the article

• javaws crashes, error in ld-linux-x86-64.so.2

  - by user54214

  I am running Ubuntu 11.10 64 bit client as Dom0 and Xen. I am having problems getting java up and running. Java itself seems to work fine, however I get strange errors, for example when I start javaws. I tried different versions and always get the same errors. I tried openjdk 1.6 and 1.7 as well as sunjava6 and 7. I alway get an error in the same lib All other applications are working fine, so it seems ld-linux-x86-64.so.2 is working fine. Any hints what could be wrong? Ubuntu01:~$ javaws # # A fatal error has been detected by the Java Runtime Environment: # # SIGILL (0x4) at pc=0x00007f4e74c5ad10, pid=7974, tid=139974945277696 # # JRE version: 6.0_23-b23 # Java VM: OpenJDK 64-Bit Server VM (20.0-b11 mixed mode linux-amd64 compressedoops) # Derivative: IcedTea6 1.11pre # Distribution: Ubuntu 11.10, package 6b23~pre11-0ubuntu1.11.10.2 # Problematic frame: # C [ld-linux-x86-64.so.2+0x14d10] _dl_make_stack_executable+0x2b70 # # An error report file with more information is saved as: # /home/r/hs_err_pid7974.log # # If you would like to submit a bug report, please include # instructions how to reproduce the bug and visit: # https://bugs.launchpad.net/ubuntu/+source/openjdk-6/ # The crash happened outside the Java Virtual Machine in native code. # See problematic frame for where to report the bug. # Aborted

  Read the article

• Nested entities in Google App Engine. Do I do it right?

  - by Aleksandr Makov

  Trying to make most of the GAE Datastore entities concept, but some doubts drill my head. Say I have the model: class User(ndb.Model): email = ndb.StringProperty(indexed=True) password = ndb.StringProperty(indexed=False) first_name = ndb.StringProperty(indexed=False) last_name = ndb.StringProperty(indexed=False) created_at = ndb.DateTimeProperty(auto_now_add=True) @classmethod def key(cls, email): return ndb.Key(User, email) @classmethod def Add(cls, email, password, first_name, last_name): user = User(parent=cls.key(email), email=email, password=password, first_name=first_name, last_name=last_name) user.put() UserLogin.Record(email) class UserLogin(ndb.Model): time = ndb.DateTimeProperty(auto_now_add=True) @classmethod def Record(cls, user_email): login = UserLogin(parent=User.key(user_email)) login.put() And I need to keep track of times of successful login operations. Each time user logs in, an UserLogin.Record() method will be executed. Now the question — do I make it right? Thanks. EDIT 2 Ok, used the typed arguments, but then it raised this: Expected Key instance, got User(key=Key('User', 5418393301680128), created_at=datetime.datetime(2013, 6, 27, 10, 12, 25, 479928), email=u'[email protected]', first_name=u'First', last_name=u'Last', password=u'password'). It's clear to understand, but I don't get why the docs are misleading? They implicitly propose to use: # Set Employee as Address entity's parent directly... address = Address(parent=employee) But Model expects key. And what's worse the parent=user.key() swears that key() isn't callable. And I found out the user.key works. EDIT 1 After reading the example form the docs and trying to replicate it — I got type error: TypeError('Model constructor takes no positional arguments.'). This is the exacto code used: user = User('[email protected]', 'password', 'First', 'Last') user.put() stamp = UserLogin(parent=user) stamp.put() I understand that Model was given the wrong argument, BUT why it's in the docs?

  Read the article

• Choosing Technology To Include In Software Design

  How many of us have been forced to select one technology over another when designing a new system? What factors do we and should we consider? How can we ensure the correct business decision is made? When faced with this type of decision it is important to gather as much information possible regarding each technology being considered as well as the project itself. Additionally, I tend to delay my decision about the technology until it is ultimately necessary to be made. The reason why I tend to delay such an important design decision is due to the fact that as the project progresses requirements and other factors can alter a decision for selecting the best technology for a project. Important factors to consider when making technology decisions: Time to Implement and Maintain Total Cost of Technology (including Implementation and maintenance) Adaptability of Technology Implementation Team’s Skill Sets Complexity of Technology (including Implementation and maintenance) orecasted Return On Investment (ROI) Forecasted Profit on Investment (POI) Of the factors to consider the ROI and POI weigh the heaviest because the take in to consideration the other factors when calculating the profitability and return on investments.For a real world example let us consider developing a web based lead management system for a new company. This system can either be hosted on Microsoft Windows based web server or on a Linux based web server. Important Factors for this Example Implementation Team’s Skill Sets Member 1  Skill Set: Classic ASP, ASP.Net, and MS SQL Server Experience: 10 years Member 2  Skill Set: PHP, MySQL, Photoshop and MS SQL Server Experience: 3 years Member 3  Skill Set: C++, VB6, ASP.Net, and MS SQL Server Experience: 12 years Total Cost of Technology (including Implementation and maintenance) Linux Initial Year: $5,000 (Random Value) Additional Years: $3,000 (Random Value) Windows Initial Year: $10,000 (Random Value) Additional Years: $3,000 (Random Value) Complexity of Technology Linux Large Learning Curve with user driven documentation Estimated learning cost: $30,000 Windows Minimal based on Teams skills with Microsoft based documentation Estimated learning cost: $5,000 ROI Linux Total Cost Initial Total Cost: $35,000 Additional Cost $3,000 per year Windows Total Cost Initial Total Cost: $15,000 Additional Cost $3,000 per year Based on the hypothetical numbers it would make more sense to select windows based web server because the initial investment of the technology is much lower initially compared to the Linux based web server.

  Read the article

• How often is seq used in Haskell production code?

  - by Giorgio

  I have some experience writing small tools in Haskell and I find it very intuitive to use, especially for writing filters (using interact) that process their standard input and pipe it to standard output. Recently I tried to use one such filter on a file that was about 10 times larger than usual and I got a Stack space overflow error. After doing some reading (e.g. here and here) I have identified two guidelines to save stack space (experienced Haskellers, please correct me if I write something that is not correct): Avoid recursive function calls that are not tail-recursive (this is valid for all functional languages that support tail-call optimization). Introduce seq to force early evaluation of sub-expressions so that expressions do not grow to large before they are reduced (this is specific to Haskell, or at least to languages using lazy evaluation). After introducing five or six seq calls in my code my tool runs smoothly again (also on the larger data). However, I find the original code was a bit more readable. Since I am not an experienced Haskell programmer I wanted to ask if introducing seq in this way is a common practice, and how often one will normally see seq in Haskell production code. Or are there any techniques that allow to avoid using seq too often and still use little stack space?

  Read the article

• Visual Studio Talk Show #119 is now online - Quand et dans quel contexte est-ce que adéquat est adéq

  - by guybarrette

  http://www.visualstudiotalkshow.com Joel Quimper: Quand et dans quel contexte est-ce que «adéquat» est «adéquat»? Nous discutons avec Joel Quimper des pratiques de développement et de la mauvaise habitude qui consiste à vouloir tout abstraire et tout généraliser. Un application offre une valeur réelle seulement lorsqu’elle est utilisée par des utilisateurs. Alors ou tracer la limite entre le sur-design, l'extensibilité et la réutilisabilité. Joel Quimper est un conseiller en architecture chez Microsoft Canada. Il travaille essentiellement avec les architectes des grandes entreprises de l'Est du Canada pour aider leur organisation à réaliser leur plein potentiel. Joel possède une vaste expérience dans la conception de solutions orientées service en utilisant les services web. Il est passionné par l'interopérabilité avec la plateforme .NET. Avant de rejoindre Microsoft, il a travaillé 10 ans pour IBM Canada dans plusieurs rôles. Plus récemment, il a travaillé comme architecte d'intégration WebSphere. Il a travaillé avec plusieurs clients dans la mise en œuvre réussie de solutions SOA. var addthis_pub="guybarrette";

  Read the article

• Masters vs. PhD - long [closed]

  - by Sterling

  I'm 21 years old and a first year master's computer science student. Whether or not to continue with my PhD has been plaguing me for the past few months. I can't stop thinking about it and am extremely torn on the issue. I have read http://www.cs.unc.edu/~azuma/hitch4.html and many, many other masters vs phd articles on the web. Unfortunately, I have not yet come to a conclusion. I was hoping that I could post my ideas about the issue on here in hopes to 1) get some extra insight on the issue and 2) make sure that I am correct in my assumptions. Hopefully having people who have experience in the respective fields can tell me if I am wrong so I don't make my decision based on false ideas. Okay, to get this topic out of the way - money. Money isn't the most important thing to me, but it is still important. It's always been a goal of mine to make 6 figures, but I realize that will probably take me a long time with either path. According to most online salary calculating sites, the average starting salary for a software engineer is ~60-70k. The PhD program here is 5 years, so that's about 300k I am missing out on by not going into the workforce with a masters. I have only ever had ~1k at one time in my life so 300k is something I can't even really accurately imagine. I know that I wouldn't have at once obviously, but just to know I would be earning that is kinda crazy to me. I feel like I would be living quite comfortably by the time I'm 30 years old (but risk being too content too soon). I would definitely love to have at least a few years of my 20s to spend with that kind of money before I have a family to spend it all on. I haven't grown up very financially stable so it would be so nice to just spend some money…get a nice car, buy a new guitar or two, eat some good food, and just be financially comfortable. I have always felt like I deserved to make good money in my life, even as a kid growing up, and I just want to have it be a reality. I know that either path I take will make good money by the time I'm ~40-45 years old, but I guess I'm just sick of not making money and am getting impatient about it. However, a big idea pushing me towards a PhD is that I feel the masters path would give me a feeling of selling out if I have the capability to solve real questions in the computer science world. (pretty straight-forward - not much to elaborate on, but this is a big deal) Now onto other aspects of the decision. I originally got into computer science because of programming. I started in high school and knew very soon that it was what I wanted to do for a career. I feel like getting a masters and being a software engineer in the industry gives me much more time to program in my career. In research, I feel like I would spend more time reading, writing, trying to get grant money, etc than I would coding. A guy I work with in the lab just recently published a paper. He showed it to me and I was shocked by it. The first two pages was littered with equations and formulas. Then the next page or so was followed by more equations and formulas that he derived from the previous ones. That was his work - breaking down and creating all of these formulas for robotic arm movement. And whenever I read computer science papers, they all seem to follow this pattern. I always pictured myself coding all day long…not proving equations and things of that nature. I know that's only one part of computer science research, but that part bores me. A couple cons on each side - Phd - I don't really enjoy writing or feel like I'm that great at technical writing. Whenever I'm in groups to make something, I'm always the one who does the large majority of the work and then give it to my team members to write up a report. Presenting is different though - I don't mind presenting at all as long as I have a good grasp on what I am presenting. But writing papers seems like such a chore to me. And because of this, the "publish or perish" phrase really turns me off from research. Another bad thing - I feel like if I am doing research, most of it would be done alone. I work best in small groups. I like to have at least one person to bounce ideas off of when I am brainstorming. The idea of being a part of some small elite group to build things sounds ideal to me. So being able to work in small groups for the majority of my career is a definite plus. I don't feel like I can get this doing research. Masters - I read a lot online that most people come in as engineers and eventually move into management positions. As of now, I don't see myself wanting to be a part of management. Lets say my company wanted to make some new product or system - I would get much more pride, enjoyment, and overall satisfaction to say "I made this" rather than "I managed a group of people that made this." I want to be a big part of the development process. I want to make things. I think it would be great to be more specialized than other people. I would rather know everything about something than something about everything. I always have been that way - was a great pitcher during my baseball years, but not so good at everything else, great at certain classes in school, but not so good at others, etc. To think that my career would be the same way sounds okay to me. Getting a PhD would point me in this direction. It would be great to be some guy who is someone that people look towards and come to ask for help because of being such an important contributor to a very specific field, such as artificial neural networks or robotic haptic perception. From what I gather about the software industry, being specialized can be a very bad thing because of the speed of the new technology. I When it comes to being employed, I have pretty conservative views. I don't want to change companies every 5 years. Maybe this is something everyone wishes, but I would love to just be an important person in one company for 10+ (maybe 20-25+ if I'm lucky!) years if the working conditions were acceptable. I feel like that is more possible as a PhD though, being a professor or researcher. The more I read about people in the software industry, the more it seems like most software engineers bounce from company to company at rapid paces. Some even work like a hired gun from project to project which is NOT what I want AT ALL. But finding a place to make great and important software would be great if that actually happens in the real world. I'm a very competitive person. I thrive on competition. I don't really know why, but I have always been that way even as a kid growing up. Competition always gave me a reason to practice that little extra every night, always push my limits, etc. It seems to me like there is no competition in the research world. It seems like everyone is very relaxed as long as research is being conducted. The only competition is if someone is researching the same thing as you and its whoever can finish and publish first (but everyone seems to careful to check that circumstance). The only noticeable competition to me is just with yourself and your own discipline. I like the idea that in the industry, there is real competition between companies to put out the best product or be put out of business. I feel like this would constantly be pushing me to be better at what I do. One thing that is really pushing me towards a PhD is the lifetime of the things you make. I feel like if you make something truly innovative in the industry…just some really great new application or system…there is a shelf-life of about 5-10 years before someone just does it faster and more efficiently. But with research work, you could create an idea or algorithm that last decades. For instance, the A* search algorithm was described in 1968 and is still widely used today. That is amazing to me. In the words of Palahniuk, "The goal isn't to live forever, its to create something that will." Over anything, I just want to do something that matters. I want my work to help and progress society. Seriously, if I'm stuck programming GUIs for the next 40 years…I might shoot myself in the face. But then again, I hate the idea that less than 1% of the population will come into contact with my work and even less understand its importance. So if anything I have said is false then please inform me. If you think I come off as a masters or PhD, inform me. If you want to give me some extra insight or add on to any point I made, please do. Thank you so much to anyone for any help.

  Read the article

• IASA South East Florida Chapter &ndash; November 2012 Meeting

  - by Rainer Habermann

  After a short introduction by Rainer Habermann and announcements for the chapter and promoting the upcoming IASA IFC Certification Class in January 2013 at Citrix, the audience was exited to welcome Jesus Rodriquez for the main presentation about “Mobilizing the Enterprise”.       Jesus is a co-founder and CEO of both Tellago Studios and Tellago, two fast growing start-ups with a unique vision around software technology. Jesus spends his days working on the technology and strategic vision of both companies. Under his leadership, Tellago and Tellago Studios have been recognized as an innovator in the areas of enterprise software and solutions achieving important awards like the Inc500, American Business Awards’ American and International Business Awards. A software scientist by background, Jesus is an internationally recognized speaker and author with contributions that include hundreds of articles and sessions at industry conferences. Jesus serves as an advisor to several software companies such as Microsoft and Oracle, and is the only person who holds both the Microsoft MVP and Oracle ACE awards. Jesus introduced the architecture of the Enterprise Mobile Backend as a service, integrating enterprise mobile applications with corporate line of business systems and providing robust backend capabilities represent some of the major challenges in today’s enterprise mobility solutions. The mobile consumer space has seen the emergence of backend as a service technologies as one of the main mechanisms for enabling backend capabilities in mobile applications. This session introduced the concept of mobile backend as a service (MBaaS) as the fundamental enabler of the next generation enterprise mobile applications. The session further explored the fundamental components and services of a mBaaS platform that makes it an ideal option for enabling backend capabilities in enterprise mobile applications. Using real world examples. Jesus demonstrated how mBaaS represents an agile and extremely simple model to integrate mobile applications with corporate systems. Thank you very much to Jesus Rodriquez for an outstanding presentation, Peak 10 Data Centers for hosting our meeting, and to TEK Systems for Snacks. Pictures taken by Ted Harwood.   Rainer Habermann President IASA SE Florida Chapter

  Read the article

• Java SE 6 Update 23 is released!

  - by [email protected]

  Java SE 6 Update 23 includes the following key changes: Java VisualVM 1.3.1 introduces the following features and enhancements:           o Added Java version and vendor information to the application Overview view           o Built on NetBeans Platform and profiler 6.9.1 Swing JMenuItem Corrections for right-to-left languages           o Non-default alignment and text orientation for the menu items in Swing have been fixed           o The position of the icon and the text where text used to overlap the icon in a menu item was corrected           o All platform Look and Feel configurations will now handle menu items in right-to-left language situations. Updated HotSpot 19 JVM Engine with improvements to overall performance and reliability. Additional Languages support in SuSE Linux Enterprise Server 10 and 11 on Chinese(Simplified), Chinese (Traditional), Japanese, and Korean locales. Supported system configuration, check - http://java.sun.com/javase/6/webnotes/install/system-configurations.htmlSee Release Notes for additional details.

  Read the article

• Gigabyte u24f Touchpad (elantech) not detected

  - by user314973

  A new Ubuntu user here. I just installed Ubuntu 14.04 on my gigabyte U24F laptop. At first the touch-pad (I believe it's elantech) was working fine but one day I turned it off using fn+f10 key from the keyboard. The next day I could no longer turn it back on and it has since been undetected by the system. xinput returns Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? Logitech USB Optical Mouse id=11 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Video Bus id=7 [slave keyboard (3)] ? Sleep Button id=8 [slave keyboard (3)] ? Video Bus id=9 [slave keyboard (3)] ? Power Button id=10 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=12 [slave keyboard (3)] so there's no touch-pad detected. I'm using a USB mouse at the moment. Attempting to run synclient gives "Couldn't find synaptics properties. No synaptics driver loaded?" Things I've tried so far to no avail Reinstalling xserver-xorg-input-synaptics. Checking dconf.editor settings, touchpad is enabled. Booting into a live usb session, touchpad no longer even works in this case. (Does this mean a fresh install wouldn't even solve the problem?) Any help is greatly appreciated!

  Read the article

• Setting Krypton Light to Screen Pixels

  - by Adam Jerrett

  So a few days back, I started playing around with Krypton XNA for 2D lighting in my game. I noticed in general, that spawning a light at (0,0) with Krypton causes the light to appear in, pretty much, the centre of the game screen. Is there any way to change this so a Krypton light's "starting point" at [0,0] would spawn at the top left of the screen, and thus follow the standard screen co-ordinates for position? I ask because currently I'm busy working on my game where my spawn point is [512,512]. With hard code, the closest I've got to the light being "central" to this point is the vector position [12,-20], which makes no sense and is impossible to craft, mathematically, if I want the light to move with the camera (the position [480,512] maps roughly to [10,-20]). So, is there any way to "normalise" the krypton lights to use standard screen co-ordinates? If you guys can, play around with the demo from the site and please see if you can find anything out about it. Documentation on the engine is rather scarce, so it's difficult to find anything relevant to my "pixel-perfect" need. It might just also be something in the code with regards to the matrices that I'm not fully understanding. Any help would be useful. Thanks.

  Read the article

• Create Pivot collections much faster than DeepZoomTools CollectionCreator class

  - by John Conwell

  I've been playing with Microsoft Live Labs Pivot to create a hierarchy of collections all linked together to allow someone to explore a hierarchy of data visually. The problem has been the generation time of the entire hierarchy. I end up creating 500 - 600 collections total and it takes hours and hours using the CollectionCreator class that comes with the DeepZoomTools.  So digging around I found a way to make the actual DeepZoom collection creation wicked fast. Dont use the CollectionCreator!  Turns out Pivot doesnt actually use the image pyramid generated by the CollectionCreator. Or if it does, its only when you open a new collection it shows all the images zooming in. But once the zoom in is complete, Pivot uses the individual DeepZoom images. What Pivot does need is the xml generated by the CollectionCreator, which is in a very simple format.  So what i did was manually generate the xml for the collection image pyramid, and then create the folder structure required (one folder per level of the pyramid), and put a single pixel png file in each folder.  Now, I can create the required files and folders for 500 collections in about 10 seconds. Sweet! Now you still have to use the ImageCreator to create a DeepZoom image for each image in the collection and that still takes some time, but at least the total processing time is way better.

  Read the article

• Ubuntu server 11.04 recognize only 1 core instead of 4

  - by Kreker

  I searched for other questions and googled a lot but I don't find a solution for solving this problem. Ubuntu Server 11.04 64bit installed on Dell Poweredge with Intel Xeon X5450. He only recognize 1 of the 4 cores I have. Tried to modify the GRUB config but didn't work. IN the machine BIOS I didn't find anything useful. CPU root@darwin:~# cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Xeon(R) CPU X5450 @ 3.00GHz stepping : 10 cpu MHz : 2992.180 cache size : 6144 KB physical id : 0 siblings : 1 core id : 0 cpu cores : 1 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm dca sse4_1 xsave lahf_lm dts tpr_shadow vnmi flexpriority bogomips : 5984.36 clflush size : 64 cache_alignment : 64 address sizes : 38 bits physical, 48 bits virtual power management: GRUB root@darwin:~# cat /etc/default/grub # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 #GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=2 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="" GRUB_CMDLINE_LINUX="noapic nolapic" #was with acpi=off # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" Complete dmesg Too long, posted on pastebin http://pastebin.com/bsKPBhzu

  Read the article

• Desktop Fun: Nebula Wallpapers

  - by Asian Angel

  Nebulae can be very colorful, breathtaking to look at, and inspire the imagination. Add a touch of that ethereal beauty to your desktop with our Nebula Wallpapers collection. Note: Click on the picture to see the full-size image—these wallpapers vary in size so you may need to crop, stretch, or place them on a colored background in order to best match them to your screen’s resolution. For more wallpapers be certain to see our great collections in the Desktop Fun section. Similar Articles Productive Geek Tips Windows 7 Welcome Screen Taking Forever? Here’s the Fix (Maybe)Desktop Fun: Starship Theme WallpapersDesktop Fun: Underwater Theme WallpapersDesktop Fun: Starscape Theme WallpapersDesktop Fun: Fantasy Theme Wallpapers TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 21 Cursor Packs for XP, Vista & 7 Map the Stars with Stellarium Use ILovePDF To Split and Merge PDF Files TimeToMeet is a Simple Online Meeting Planning Tool Easily Create More Bookmark Toolbars in Firefox Filevo is a Cool File Hosting & Sharing Site

  Read the article

• OBIEE 11.1.1.7.131017 is Available for Oracle Business Intelligence Enterprise Edition and Exalytics

  - by Saresh

  OBIEE 11.1.1.7.131017 is Available for Oracle Business Intelligence Enterprise Edition and Exalytics You may refer Note 1595219.1 -OBIEE 11g 11.1.1.7.131017 is Available for Oracle Business Intelligence Enterprise Edition and Exalytics for more details. Additional information: You can directly apply OBIEE 11.1.1.7.131017  on the top of OBIEE 11.1.1.7.0 without applying the OBIEE 11.1.1.7.0 patch. Oracle BI EE Suite Bundle Patch 11.1.1.7.131017 introduces support for Microsoft Internet Explorer 10 Oracle BI EE Suite Bundle Patch 11.1.1.7.131017 integrates support for Oracle BI Mobile App Designer into Oracle BI Presentation Services. The Home page displays a new Create Mobile App option and a link to the Mobile Apps Library; the New menu now also includes a Mobile App option. Note that to use these new options, you must also install the Oracle BI Mobile App Designer. Oracle BI Mobile App Designer is available in a separate patch (17220944) available from My Oracle Support. Apply the Mobile App Designer patch after installing Oracle BI EE Suite Bundle Patch 11.1.1.7.131017. Note that if you have previously installed Oracle BI Mobile App Designer on the BI system, then you do not have to re-apply Mobile App Designer patch 17220944. However, you will have to make a configuration change to re-enable the new Mobile App options. Oracle BI EE Suite Bundle Patch 11.1.1.7.131017 improves functionality for exporting data from analyses, dashboards, and other Oracle BI Presentation Catalog objects into Microsoft Excel.

  Read the article

• Hijacking ASP.NET Sessions

  - by Ricardo Peres

  So, you want to be able to access other user’s session state from the session id, right? Well, I don’t know if you should, but you definitely can do that! Here is an extension method for that purpose. It uses a bit of reflection, which means, it may not work with future versions of .NET (I tested it with .NET 4.0/4.5). 1: public static class HttpApplicationExtensions 2: { 3: private static readonly FieldInfo storeField = typeof(SessionStateModule).GetField("_store", BindingFlags.NonPublic | BindingFlags.Instance); 4:  5: public static ISessionStateItemCollection GetSessionById(this HttpApplication app, String sessionId) 6: { 7: var module = app.Modules["Session"] as SessionStateModule; 8:  9: if (module == null) 10: { 11: return (null); 12: } 13:  14: var provider = storeField.GetValue(module) as SessionStateStoreProviderBase; 15:  16: if (provider == null) 17: { 18: return (null); 19: } 20:  21: Boolean locked; 22: TimeSpan lockAge; 23: Object lockId; 24: SessionStateActions actions; 25:  26: var data = provider.GetItem(HttpContext.Current, sessionId.Trim(), out locked, out lockAge, out lockId, out actions); 27:  28: if (data == null) 29: { 30: return (null); 31: } 32:  33: return (data.Items); 34: } 35: } As you can see, it extends the HttpApplication class, that is because we need to access the modules collection, for the Session module. Use with care!

  Read the article

• loading 60 images locally fast is it possible...? [closed]

  - by Tariq- iPHONE Programmer

  when my app starts it loads 60 images at a time in UIImageView and it also loads a background music. in simulator it works fine but in IPAD it crashes.. -(void)viewDidLoad { NSAutoreleasePool *pool = [[NSAutoreleasePool alloc] init]; //img.animationImages = [[NSArray arrayWithObjects: MyImages = [NSArray arrayWithObjects: //[UIImage imageNamed: @"BookOpeningB001.jpg"],...... B099,nil]; //[NSTimer scheduledTimerWithTimeInterval: 8.0 target:self selector:@selector(onTimer) userInfo:nil repeats:NO]; img.animationImages = MyImages; img.animationDuration = 8.0; // seconds img.animationRepeatCount = 1; // 0 = loops forever [img startAnimating]; [self.view addSubview:img]; [img release]; [pool release]; //[img performSelector:@selector(displayImage:) ]; //[self performSelector:@selector(displayImage:) withObject:nil afterDelay:10.0]; [self performSelector: @selector(displayImage) withObject: nil afterDelay: 8.0]; } -(void)displayImage { SelectOption *NextView = [[SelectOption alloc] initWithNibName:nil bundle:nil]; [self presentModalViewController:NextView animated:NO]; [NextView release]; } Am i doing anything wrong ? Is there any other alternative to load the local images faster in UIImageView !

  Read the article

• Algorithms or patterns for a linked question and answer cost calculator

  - by kmc

  I've been asked to build an online calculator in PHP (and the Laravel framework). It will take the answers to a series of questions to estimate the cost of a home extension. For example, a couple of questions may be: What is the lie of your property? Flat, slightly inclined, heavily inclined. (these suggestive values could have specific values in the underlying calculator like, 0 degrees, 5 degrees, 10 degrees. What is your current flooring system? Wooden, or concrete? These would then impact the results of other questions. Once the size of the extension has been input, the lie of the land will affect how much site works will cost, and how much rubbish collection will cost. The second question will impact the cost of the extensions flooring, as stumping and laying floorboards is a different cost to laying foundations and a concrete slab. It will also influence what heating and cooling systems are available in the calculator. So it's VERY interlinked. The answer to any question can influence the options of other questions, and the end result. I'm having trouble figuring out an approach to this that will allow new options and questions to be plugged in at a later stage without having things too coupled. The Observer pattern, or Laravel's events may be handy, but currently the sheer breadth of the calculator has me struggling to gather my thoughts and see a sensible implementation. Are there any patterns or OO approaches that may help? Thanks!

  Read the article

< Previous Page | 700 701 702 703 704 705 706 707 708 709 710 711  | Next Page >